Catechol‐Functionalized Polyolefins

The incorporation of comonomers during ethylene polymerization can efficiently modulate important material properties of the polyolefins. Utilizing bioresourced comonomers for the generation of high‐performance polyolefin materials is attractive from a sustainability point of view. In this contribution, bioresourced eugenol and related comonomers were incorporated into polyolefins through palladium‐catalyzed copolymerization and terpolymerization reactions. Importantly, high‐molecular‐weight catechol‐functionalized polyolefins can be generated. The introduction of different metal ions induces efficient interactions with the incorporated catechol groups, leading to enhanced mechanical properties and self‐healing properties. Moreover, the catechol functionality can greatly improve other properties such as surface properties, adhesion properties, and compatibilizing properties. The catechol‐functionalized polyolefin was demonstrated as a versatile platform polymer for accessing various materials with dramatically different properties.     

An Insight into the Diffusion of Unsaturated Polyester (UP) Resin into Expanded Graphite (EG) to Improve the Mechanical Properties of the UP/EG Composites

Abstract

Polymer/expanded graphite (EG) nanocomposites have great importance in many industrial applications mainly due to their high electrical/thermal conductivity or flame retardancy. However, to fully employ the benefits of polymer/EG nanocomposites one must consider the high degree of porosity of EG. The high degree of porosity of EG can deteriorate the composites’ mechanical properties if the polymer chains cannot diffuse completely into the EG pores. In this article, an insight is given into the diffusion of unsaturated isophthalic polyester (UP) resin, consisting of a combination of maleic anhydride and isophthalic anhydride in the resin backbone, with two viscosities, into the pores of the EG particles of various degrees of porosity. The diffusion experiments were carried out on compressed EG tablets with the same density but different porosity due to the different porosity of the EG particles. The results showed that the diffusion rate of the UP resin with higher viscosity slightly decreased when the EG porosity decreased but, in the opposite way, it strongly increased for the low viscosity UP resin. The EG nanocomposites samples were molded at varying pressures. The micrographs of the fractured surfaces of the EG nanocomposites showed that the EG pores were not filled with resin, thus the EG nanocomposites had residual pores. It was found that composites containing EGs with higher expansion ratio and larger particles and pores showed larger residual pores. Furthermore, the composites prepared with the more viscous UP resin showed more residual pores. By applying a pressure of 10?bar instead of 1?bar, a reduction of 7–20% in the residual pores of the nanocomposites was observed which led to improved mechanical properties by up to 20% in flexural strength for the EG with the highest expansion ratio.     

Ti0.33WO3电子结构和太阳辐射屏蔽性能第一性原理研究

节能减排已成为当今社会发展的主题,对节约能源、提高太阳能的高效综合利用的新型窗用透明隔热材料的理论设计和研究尤其重要.本文采用基于密度泛函理论的计算方法,研究了六方相三氧化钨Ti掺杂前、后的晶格参数、电子能带结构、形成能和光学性质.研究结果表明,Ti掺杂后晶格体积增大,系统能量降为负值,体系具有更好的稳定性;掺杂后电子能带结构发生很大的变化,但材料仍保持n型电导率;随之,其光学性质也发生改变,掺杂前h-WO3无近红外吸收性能,掺杂后的Ti0.33WO3具有很强的近红外吸收性能.在此基础上研究了Ti掺杂h-WO3前、后的太阳辐射屏蔽性能,掺杂前无太阳辐射屏蔽性能;掺杂后的Ti0.33WO3薄膜具有可见光高透明、近红外屏蔽的性能.计算结果为Ti掺杂h-WO3在窗用透明隔热材料方面的研究提供了理论依据.     

A solvent-governed surface state strategy for rational synthesis of N and S co-doped carbon dots with multicolour fluorescence

ABSTRACT

Multicolour emissive carbon dots (CDs) are widely investigated by virtue of their merits on fluorescent properties. Method on heteroatom doping assisted with various solvents has been proved efficient in achieving multiple-colour-emissive CDs, especially long-wavelength emission. Herein, a synthesis of multicolour-emissive CDs by controlled surface function is reported. By tuning the thermal-pyrolysis temperature and molar ratio of reactants, optimal emission of the resulted CDs gradually shifts from blue to yellow light with the assistance of different solvents. According to the emissive relationship dependent on excitation, fluorescence lifetimes, and FT-IR of these CDs, the different surface states participated with S and N elements on the surface of carbogenic core govern fluorescent colours of the CDs. In terms of the applications, blue CDs (B-CDs) exhibits high sensitivity for ion detections of Ag⁺ and Fe³⁺, which is further illustrated to have different quenching mechanisms each other because that these ions have the affinity interaction with different surface groups of the CDs. Moreover, blue and yellow CDs solutions are mixed with PVP water solution to fabricate white-light CDs/PVP film, which exhibits stable fluorescence with a CIE coordinate of (0.32, 0.33) and endows these CDs as potentially fluorescent nanomaterial in the solid state lighting field.     

基于化学学科认知障碍突破的中考复习教学实践* ——以“二氧化碳的性质”为例

分析学生对二氧化碳的3个典型学科认知障碍,以“二氧化碳的捕捉”为情境,通过“尝试捕捉二氧化碳”“谁在捕捉二氧化碳”“捕捉背后的原理”等3个主要环节,实现对学科认知障碍的突破,展示了一种新的中考复习教学思路。     

电镀铜实验中镀层性质及其影响因素的探究*

电镀实验是电解原理应用的重要案例,通过实验不仅要获得定性的感性认知,还应该获得定量的理性数据。针对电镀铜实验,通过改变铜离子浓度、pH、电解时间、电解电压和电解温度等因素,探究其对镀层厚度、均匀性和致密性等性质的影响,在电解原理的基础上分析其形成机制,从而确定了电镀铜较适宜的操作条件,以此为学生开展电镀实验提供参考案例与研究思路。     

新型非对称二苯并[b,f][1,5]二氮杂环辛四烯的合成

以两种不同取代的2-氨基二苯甲酮为原料,氯苯为溶剂,BF3-Et2O为脱水剂,通过分子间脱水一步环化缩合制备非对称二苯并[b,f][1,5]二氮杂环辛四烯衍生物。运用HPLC监控反应过程,优化合成工艺,得到最佳反应条件为:等物质的量的两种不同取代2-氨基二苯甲酮和BF3-Et2O,在氯苯中回流反应12 h。化合物4a^4c为新化合物,其结构经1H NMR,13C NMR和MS(ESI)表征。     

Studies on coherent and incoherent spin dynamics that control the magnetic field effect on photogenerated radical pairs

Since 1970s, magnetic field effects (MFEs) on photogenerated radical pairs have been the centre of focus in the field of spin chemistry. The MFE attributes to quantum mechanical interconversion between the singlet and triplet radical pair states and subsequent spin-selective recombination reactions. In this New View article, the author picks up two hot topics studied during the last two decades, which are (i) so-called low field effect (LFE) and (ii) 2J-resonance MFE on fixed distance donor–acceptor linked molecules. In both of the topics, quantum mechanical explanations are given referring to recent reports, and some novel calculations have been carried out for bridging theoretical and experimental data for long-lived radical pairs. For the first topic, time domain calculations of coherent state mixing have been carried out for elucidation of hyperfine (HF) structure dependence of the LFE. For the second topic, Monte Carlo simulations of the torsional motion of polyaromatic linker unit have been carried out for the demonstration of fast decoherence in such rigid molecules. From these considerations, future possibilities of MFE studies on photo-functional materials and biomolecules have been indicated.     

Cycloparaphenylene (CPP) series are molecular models for graphene armchair edges: trends in their aromaticity and cyclic conjugation are evaluated

Cycloparaphenylene ([r]CPP) and cyclacene ([r]CA) series are models for short carbon nanotubes. It is shown that armchair edges in model cycloparaphenylenes possess greater aromaticity and cyclic conjugation than do zigzag edges in model cyclacenes. According to Aihara’s bond resonance energy (BRE) and Bosanac and Gutman energy effect (ef) measurements, cycloparaphenylenes are twice as aromatic as cyclacenes. The general solution of all eigenvalues of all members of the cycloparaphenylene series is given. The origin of the recurrence of some eigenvalues are determined.     

Dynamical Analysis of a New Chaotic Fractional Discrete-Time System and Its Control

This article proposes a new fractional-order discrete-time chaotic system, without equilibria, included two quadratic nonlinearities terms. The dynamics of this system were experimentally investigated via bifurcation diagrams and largest Lyapunov exponent. Besides, some chaotic tests such as the 0–1 test and approximate entropy (ApEn) were included to detect the performance of our numerical results. Furthermore, a valid control method of stabilization is introduced to regulate the proposed system in such a way as to force all its states to adaptively tend toward the equilibrium point at zero. All theoretical findings in this work have been verified numerically using MATLAB software package.